South African Class 6E1, Series 5

South African Class 6E1, Series 5
E1629 at Koedoespoort, Pretoria, Gauteng, 8 October 2009, in brand new Shosholoza Meyl passenger livery
Power type Electric
Designer Union Carriage and Wagon
Builder Union Carriage and Wagon
Model UCW 6E1
Build date 1974-1975
Total produced 100
UIC classification Bo-Bo
Gauge 3 ft 6 in (1,067 mm) Cape gauge
Bogies 3.430 m (11 ft 3.0 in) wheelbase
Wheel diameter 1,220 mm (48 in)
Wheelbase 11.279 m (37 ft 0.1 in)
Length 15.494 m (50 ft 10.0 in)
Width 2.896 m (9 ft 6.0 in)
Height 4.089 m (13 ft 5.0 in) pantographs down
Axle load 22,226 kg (21.9 long tons)
Locomotive weight 88,904 kg (87.5 long tons)
Current collection
method
Pantographs
Traction motors Four AEI 283 AZ
Transmission 18/67 Gear ratio
Top speed 113 km/h (70 mph)
Power output Per motor:
623 kW (835 hp) 1 hour
563 kW (755 hp) continuous
Total:
2,492 kW (3,342 hp) 1 hour
2,252 kW (3,020 hp) continuous
Tractive effort 311 kN (70,000 lbf) starting
221 kN (50,000 lbf) 1 hour
193 kN (43,000 lbf) continuous at 40 km/h (25 mph)
Locomotive brakes Regenerative
Train brakes Air & Vacuum
Career South African Railways
Spoornet
Transnet Freight Rail
Shosholoza Meyl
Class Class 6E1
Power class 3 kV DC
Number in class 99
Number E1546-E1599, E1601-E1645[1]
Delivered 1974-1975
First run 1974

In 1974 and 1975 the South African Railways placed one hundred Class 6E1, Series 5 electric locomotives with a Bo-Bo wheel arrangement in main line service. One of them was later withdrawn from revenue service for use as an experimental 25 kV AC locomotive.[1][2][3]

Contents

[hide]

Manufacturer

The Class 6E1, Series 5 3 kV DC electric locomotive was designed and built for the South African Railways (SAR) by Union Carriage and Wagon (UCW) in Nigel, Transvaal, with the electrical equipment supplied by the General Electric Company (GEC). One hundred locomotives were delivered in 1974 and 1975, numbered E1546 to E1645.[4]

UCW did not allocate builder’s numbers to the locomotives it built for the SAR. While the usual practice by most other locomotive builders was to allocate builder’s numbers or works numbers to record the locomotives built by them, UCW simply used the SAR running numbers for their record keeping.[1]

Characteristics

Bogies

To ensure the maximum transfer of power to the rails without causing wheel slip, the Class 6E1 was built with sophisticated traction links between the bogies and the frames and equipped with electronic wheel slip detection. These traction struts and linkages were to become a distinguishing feature of most subsequent South African electric locomotive models.[2]

Orientation

These dual cab locomotives have a roof access ladder on one side only, just to the right of the cab access door. The roof access ladder end is marked as the number 2 end. A passage along the centre of the locomotive connects the cabs.[1]

Series identifying features

The South African Class 6E1 was produced in eleven series over a period of nearly sixteen years, nine hundred and sixty units altogether, all built by UCW. This makes the 6E1 the most numerous single locomotive class ever to have seen service in South Africa and serves as ample proof of a highly successful design.[1][2]

While some Class 6E1 series are visually indistinguishable from their predecessors or successors, some externally visible changes did occur over the years. Series 2 and all subsequent Class 6E1 series can be distinguished from Series 1 locomotives by their sandboxes that are not mounted on the bogies as before, but along the bottom edge of the locomotive body with the sandbox lids fitting into recesses in the body sides. The Series 3 to Series 5 locomotives are visually indistinguishable from each other, the only externally visible difference being the narrower stirrup middle step below the side doors of Series 3 number E1345 and earlier locomotives.[1][2][5][6]

Service

The Class 6E1 family saw service all over both of the Transnet Freight Rail (TFR) 3 kV DC main line and branch line networks.[3]

Cape Western network

The smaller network is the Cape Western line between Cape Town and Beaufort West, with the locomotives based at the Bellville Depot in Cape Town.[3]

Northern network

The larger network covers portions of the Northern Cape, the Free State, Natal, Gauteng, North West Province and Mpumalanga, the main routes in this vast area being as follows:[3]

The electric locomotives allocated to depots within this network are largely pooled and can operate anywhere in the network as required by the Operating Department, but they return to their home depots for maintenance every twenty-eight days.[3]

In 2011 the Class 6E1 began to be withdrawn from the Natal corridor (NatCor) line between Johannesburg and Durban, being replaced with Class 18E locomotives.[3]

The coastal sections from Durban to Empangeni in the north and Port Shepstone in the south were dieselised at the end of October 2011, using EMD Class 34 and Class 37-000 locomotives that were displaced by new class 43-000 diesel-electric locomotives on the line from Mpumalanga to Richards Bay, via Swaziland. The overhead catenary equipment between Stanger and Empangeni and between Kelso and Port Shepstone was to be removed soon after.[7]

Test bed for 25 kV AC research

Of the one hundred Series 5 units produced, number E1600, was withdrawn from revenue service in 1978, rebuilt as a test-bed for 25 kV AC electrification and reclassified to Class Experimental AC. This was done while the electrification of the four isolated 25 kV routes was in progress. E1600 was never returned to revenue service. The four 25 kV AC routes are:[2]

Class 16E

During 1990 and 1991 Spoornet semi permanently coupled several pairs of otherwise unmodified Class 6E1 locomotives, reclassified them to Class 16E and allocated a single running number to each pair, with the individual locomotives in the pairs inscribed "A" or "B". The aim was to accomplish savings on cab maintenance by coupling the locomotives at their number 1 ends, abandoning the number one end cabs in terms of maintenance and using only the number two end cabs. Two known Series 5 locomotives, numbers E1549 and E1607, were part of such Class 16E pairs and became Class 16E number 16-319B and 16-335A respectively.[3]

Liveries

The main picture shows E1629 in the Shosholoza Meyl livery of the Passenger Rail Agency of South Africa (PRASA).

See also

References

  1. ^ a b c d e f South African Railways Index and Diagrams Electric and Diesel Locomotives, 610mm and 1065mm Gauges, Ref LXD 14/1/100/20, 28 January 1975, as amended
  2. ^ a b c d e Paxton, Leith; Bourne, David (1985). Locomotives of the South African Railways (1st ed.). Cape Town: Struik. pp. 128-129, 136. ISBN 0869772112. 
  3. ^ a b c d e f g h Middleton, John N. (2002). Railways of Southern Africa Locomotive Guide - 2002 (as amended by Combined Amendment List 4, January 2009) (2nd, Dec 2002 ed.). Herts, England: Beyer-Garratt Publications. pp. 49-51. 
  4. ^ "UCW - Electric locomotives". The UCW Partnership. Archived from the original on 12 October 2007. http://web.archive.org/web/20071012023401/http://www.ucw.co.za/pdf/electric_loco.pdf. Retrieved 30 September 2010. 
  5. ^ E1345 with narrow stirrup
  6. ^ E1346 with wide stirrup
  7. ^ KwaZulu-Natal coastal region de-electrification